Did you observe a puddle of water around the toilet? That is a potential cause for concern. It could indicate a leaking toilet. Apart from the water damage, it can also lead to high water bills. Moreover, the annoying drip sound can be enough to keep you awake at night. Fortunately, there are some tips that explain how to fix a leaking toilet. You can follow these instructions to resolve the issue. Delaying it will only cause more problems with time.
Tools And Materials Needed To Fix A Leaking Toilet?
Are you ready to know how to fix a leaking toilet? Before you get started, you must gather a list of tools and materials. These are –
- Slip-joint pliers
- Ballcock assembly
Do you want to know how to fix a leaking toilet? Check out the steps below so that you can adopt this process with ease.
Step 1: Check out the inlet valve
One of the most common causes of a leaking toilet is a damaged inlet or float valve present on the ballcock. Keep in mind that it is the float that regulates the water level and indicates the inlet valve to turn off the water flow. If the mechanism fails, the water rises and leaks into the toilet bowl via the overflow tube.
You must check out the inlet valve. For this, flush the toilet and lift the rod that keeps the float in place when the water level increases. Now, if the water stops rising, it means that the inlet valve is in good condition. It also means that the issue could be with the float.
Step 2: Make adjustments to the float
To make adjustments to the float level, you can turn the screw located just above the ballcock. However, if the adjustment fails and the problem remains, the float might need replacements. It is relatively easy to purchase and install a new float and rod. It is a vital step in – how to fix a leaking toilet.
Step 3: Shut off the water
If the problem still remains, then the cause could be damage to the ballcock. Here, you must remember that the ballcock can be repaired. But, it is advisable that you replace the component for efficiency.
In order to make the replacement, you must locate the shutoff valve and turn the water supply off. Make sure that you remove the extra water with the aid of a sponge.
Step 4: Replace the ballcock assembly
The first step in replacing the ballcock assembly is to remove the water supply line that leads to the ballcock bottom at the tank base. Then, use slip-joint pliers to unfasten the nut that keeps the ballcock firmly in place.
Then, take out the assembly and install the new one. After that, thread on the new nut and make sure to tighten it. Now, attach the supply line again.
Within the tank, you must now clip the refill tube and turn on the water. It is a crucial step in – how to fix a leaking toilet.
Step 5: Take a look at the flapper
Another common cause of leaking toilets is the flapper. In order to be sure that it is the flapper, you need to switch the water supply off. After that, you must wait for some time to see if the water level within the tank falls. If there is a noticeable decrease in the water level, then you might need to replace the flapper.
Step 6: Put in a new flapper
Here, the first thing that you need to do is drain the tank. After that, turn off the water and flush the toilet. Now, clean the flapper seat and make sure that it’s clean. After that, make sure that the new flapper fits perfectly.
Having Leaking Issues With Your Toilet? Get Expert Attention Now!
There are various reasons that can contribute to a leaking toilet. Regardless of the cause, you must fix the problem as soon as possible. You can even follow the simple DIY tips. But, for that, you must know how to fix a leaking toilet. However, if the issues don’t resolve, you must call in the experts immediately.
Local Plumbing Mosman provides affordable leaking toilet repair services. We have a team of reliable plumbers, technicians, and gas fitters with expertise and technical training that can handle different situations. Moreover, we only use the latest tools and opt for the most viable solutions. Furthermore, we charge affordable price rates and are open round the clock. Just get in touch with us, and we will be right there!